Brothers; Olly, Guy and Tom Bridge recently headed with their parents to South Africa to enjoy consistent wind to train in. Aged between 10 and 13, all three set a level of skill not seen in young groms before.
Only the best of kitesurfing world videos
May 1, 2012
Teddy Lyons Triple-S Wildcard Entry
Teddy Lyons's wildcard entry for the Triple-S in Hatteras, NC at REAL Watersports.
Location: California, New Jersey
Film: TDZ, Ted Lyons
Camera: 7D, T2i
Ride With Marty
Ride with KiteMovement rider Martina Santos D’Eustachio in Paracuru and Taiba, Brasil.
Project Story: GB 70 race board
Installing the finboxes on the GB70 kiteboard build.
Set strap insert locations, cover the finbox tops and epoxy the vent, FCS plug and leash plug.
Cutting the glass for my GB70 couarse race kiteboard build.
This step we are putting the epoxy on. Resin Research 2000 resin with
2100S hardener. Fill coated over tacky but not cured surface.
Glassing the deck on my GB70 coarse race build. At this point the deck
patch and foot area is already glassed. 2 layers of 6 oz E-glass. The
deck is cut lapped
patch and foot area is already glassed. 2 layers of 6 oz E-glass. The
deck is cut lapped.
Taking the new board for a spin and splash!
Set strap insert locations, cover the finbox tops and epoxy the vent, FCS plug and leash plug.
Cutting the glass for my GB70 couarse race kiteboard build.
This step we are putting the epoxy on. Resin Research 2000 resin with
2100S hardener. Fill coated over tacky but not cured surface.
Glassing the deck on my GB70 coarse race build. At this point the deck
patch and foot area is already glassed. 2 layers of 6 oz E-glass. The
deck is cut lapped
patch and foot area is already glassed. 2 layers of 6 oz E-glass. The
deck is cut lapped.
Taking the new board for a spin and splash!
Subscribe to:
Posts (Atom)