Installing the finboxes on the GB70 kiteboard build.
Set strap insert locations, cover the finbox tops and epoxy the vent, FCS plug and leash plug.
Cutting the glass for my GB70 couarse race kiteboard build.
This step we are putting the epoxy on. Resin Research 2000 resin with
2100S hardener. Fill coated over tacky but not cured surface.
Glassing the deck on my GB70 coarse race build. At this point the deck
patch and foot area is already glassed. 2 layers of 6 oz E-glass. The
deck is cut lapped
patch and foot area is already glassed. 2 layers of 6 oz E-glass. The
deck is cut lapped.
Taking the new board for a spin and splash!
Only the best of kitesurfing world videos
